RPM ARRMA Kraton/Outcast 6S Front Left Upper & Lower Suspension Arms are an optional upgrade for ARRMA Kraton, Notorious, Talion, Fireteam & Outcast models. The design modifications incorporated accommodate changes made by ARRMA for V5 and EXB versions of these vehicles. However, they are reverse compatible for older models (see NOTE below). All RPM A-arms are moulded from RPM's nearly indestructible blend of engineering grade nylons, for performance you can rely on when conditions get rough!
Beefier
RPM A-arms are significantly beefier than the original 6S version A-arms. Lower A-arm support beams are 30% thicker while upper A-arms are more than 22% thicker. The added thickness not only improves durability and strength, it also reduces flex. Less flex equates to more predictable suspension performance and handling.
Extra Suspension Options
The lower A-arm has an added shock mount hole further outboard. This additional position provides a lower profile suspension set-up. The shocks lay down a little further, dropping the ride height for a lower centre of gravity. A lower centre of gravity equates to higher corner speeds.
Caster Clip Elimination
As for the upper A-arm, RPM eliminated the caster spacers. This allowed room to widen the arm at the inner hinge pin mount. The extra width creates more of an “A” shape, stabilizing the upper A-arm. A more stable A-arm improves steering and suspension performance while adding strength and durability.
Features
- Stock replacement a-arms for V5 / EXB models (see NOTE below)
- Extra shock mount hole for added suspension versatility
- Fits most 6S version models (see NOTE below)
- Sold as one upper and one lower in each package
Note
- V5 & EXB models: Stock replacement A-arms for ARRMA ARA330655 and ARRMA ARA330656.
- V4 and earlier models: Requires 1 ARRMA ARA713032 Shock Mount Pin & 1 ARRMA ARA330645 End Cap. Replaces stock ARRMA ARA330218 & ARA330219.
- RPM ARRMA Kraton, Talion, Notorious, Fireteam & Outcast A-arms are sold as one upper and one lower in each package. One left and one right package is needed for each vehicle. RPM A-arms replace the upper arms from ARRMA ARA330655 and the lower arms from ARRMA ARA330656.
